TCU and TCM repair and programming
Transmission Control Unit and Module repair and programming, alongside mechatronics and solenoid work.

What we do
Transmission Control Unit / Module (TCU / TCM) repair and programming
Reconditioned mechatronics and solenoid replacement
Transmission fluid (ATF / DCTF) servicing
Signs to mention
A gearbox warning light, limp mode, or shifts that feel wrong. Send Jason a photo of the dashboard and the car model.
Past job: an Audi A6 with a reconditioned Transmission Control Unit, programming and fresh transmission fluid.
Price and timing: these depend on the car and on what the inspection finds. WhatsApp Jason to confirm for your car.

How the work goes

A Honda on the lift, gearbox out on a yellow stand Diagnose
Tell Jason what the car is doing. The car comes in and we find where the problem really is.

Overhaul on the bench: case, clutch packs, planetary gears, differential and filter Open and inspect
When the gearbox has to come apart, it is laid out on the bench so every part can be seen.

Valve body and solenoids, with the separator plate alongside Repair only what is needed
Worn or faulty parts are fixed or replaced. The parts that are fine stay in.

Automatic gearbox lowered onto the orange transmission jack Refit and test
The gearbox goes back in and the car is checked before it is handed back to you.
Tell Jason what your gearbox is doing
Send the car model and the symptom. A short video of the problem helps too.